First instead of 1 when referencing
5
I'm using an enumeration with labels assigned to the items.
Referencing to the items it works fine, but in some cases I would like to have "1st" or even "first" instead of just "1", with the former one not being that much of an issue, but as I'm also using hyperref I would like to have "1st" as a link and not only "1"st with the "1" being the link.
But the "first" is more important for me and it should also be a clickable link.
Does anyone have a solution for my issue?
see the MWE here:
documentclass{article}
usepackage[utf8]{inputec}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The first item xyz...
end{document}
hyperref
asked 5 hours ago
AndreasAndreas
284
New contributor
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
5
I'm using an enumeration with labels assigned to the items.
Referencing to the items it works fine, but in some cases I would like to have "1st" or even "first" instead of just "1", with the former one not being that much of an issue, but as I'm also using hyperref I would like to have "1st" as a link and not only "1"st with the "1" being the link.
But the "first" is more important for me and it should also be a clickable link.
Does anyone have a solution for my issue?
see the MWE here:
documentclass{article}
usepackage[utf8]{inputec}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The first item xyz...
end{document}
hyperref
asked 5 hours ago
AndreasAndreas
284
New contributor
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
1
Welcome to TeX - LaTeX!
– Andrew Swann
5 hours ago
add a comment |
5
5
5
0
I'm using an enumeration with labels assigned to the items.
Referencing to the items it works fine, but in some cases I would like to have "1st" or even "first" instead of just "1", with the former one not being that much of an issue, but as I'm also using hyperref I would like to have "1st" as a link and not only "1"st with the "1" being the link.
But the "first" is more important for me and it should also be a clickable link.
Does anyone have a solution for my issue?
see the MWE here:
documentclass{article}
usepackage[utf8]{inputec}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The first item xyz...
end{document}
hyperref
asked 5 hours ago
AndreasAndreas
284
New contributor
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I'm using an enumeration with labels assigned to the items.
Referencing to the items it works fine, but in some cases I would like to have "1st" or even "first" instead of just "1", with the former one not being that much of an issue, but as I'm also using hyperref I would like to have "1st" as a link and not only "1"st with the "1" being the link.
But the "first" is more important for me and it should also be a clickable link.
Does anyone have a solution for my issue?
see the MWE here:
documentclass{article}
usepackage[utf8]{inputec}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The first item xyz...
end{document}
hyperref
hyperref
asked 5 hours ago
AndreasAndreas
284
New contributor
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
AndreasAndreas
284
New contributor
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
AndreasAndreas
284
New contributor
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
AndreasAndreas
284
asked 5 hours ago
AndreasAndreas
284
284
New contributor
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Andreas is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
1
Welcome to TeX - LaTeX!
– Andrew Swann
5 hours ago
add a comment |
1
Welcome to TeX - LaTeX!
– Andrew Swann
5 hours ago
1
1
Welcome to TeX - LaTeX!
– Andrew Swann
5 hours ago
Welcome to TeX - LaTeX!
– Andrew Swann
5 hours ago
add a comment |
2 Answers
2
active
oldest
votes
5
You can use hyperref to create a link like ref would do (the first argument is an optional argument, but I don't know why):
documentclass{article}
usepackage[utf8]{inputenc}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The hyperref[itm:1]{first} item xyz...
end{document}
answered 5 hours ago
Ulrike FischerUlrike Fischer
201k9309695
Works like a charm, thanks a lot!
– Andreas
5 hours ago
add a comment |
5
Building on Ulrike’s answer,
documentclass{article}
usepackage{fmtcount}
usepackage{refcount}
usepackage[colorlinks=true]{hyperref}
newcommand{ordinalref}[1]{%
hyperref[#1]{ordinalstringnum{getrefnumber{#1}}}%
}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ordinalref{itm:1} item xyz...\
The first item xyz...
end{document}
It doesn't work for nested items, unless you change the reference format.
answered 2 hours ago
egregegreg
737k8919353263
Thanks, that also looks like a great solution and an even more flexible one than Ulrikes as it's more automated when adding/removing items. But is it possible to define the language for that to something different than english?
– Andreas
1 hour ago
1
@Andreasfmtcountsupports several languages, see its manual.
– egreg
1 hour ago
Took some time, but now I've got it working like I want it to, with the german genders, thank you VERY much!
– Andreas
56 mins ago
This won't work if you change the numbering in the enumerate e.g. to alph or roman, or in a nested enumerate (which uses (a) as label). It would be imho better to use zref instead of refcount for something like this.
– Ulrike Fischer
30 mins ago
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Andreas is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f487498%2ffirst-instead-of-1-when-referencing%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
5
You can use hyperref to create a link like ref would do (the first argument is an optional argument, but I don't know why):
documentclass{article}
usepackage[utf8]{inputenc}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The hyperref[itm:1]{first} item xyz...
end{document}
answered 5 hours ago
Ulrike FischerUlrike Fischer
201k9309695
Works like a charm, thanks a lot!
– Andreas
5 hours ago
add a comment |
5
You can use hyperref to create a link like ref would do (the first argument is an optional argument, but I don't know why):
documentclass{article}
usepackage[utf8]{inputenc}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The hyperref[itm:1]{first} item xyz...
end{document}
answered 5 hours ago
Ulrike FischerUlrike Fischer
201k9309695
Works like a charm, thanks a lot!
– Andreas
5 hours ago
add a comment |
5
5
5
You can use hyperref to create a link like ref would do (the first argument is an optional argument, but I don't know why):
documentclass{article}
usepackage[utf8]{inputenc}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The hyperref[itm:1]{first} item xyz...
end{document}
answered 5 hours ago
Ulrike FischerUlrike Fischer
201k9309695
You can use hyperref to create a link like ref would do (the first argument is an optional argument, but I don't know why):
documentclass{article}
usepackage[utf8]{inputenc}
usepackage[colorlinks=true]{hyperref}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ref{itm:1}st item xyz...\
The hyperref[itm:1]{first} item xyz...
end{document}
answered 5 hours ago
Ulrike FischerUlrike Fischer
201k9309695
answered 5 hours ago
Ulrike FischerUlrike Fischer
201k9309695
answered 5 hours ago
Ulrike FischerUlrike Fischer
201k9309695
answered 5 hours ago
Ulrike FischerUlrike Fischer
201k9309695
201k9309695
Works like a charm, thanks a lot!
– Andreas
5 hours ago
add a comment |
Works like a charm, thanks a lot!
– Andreas
5 hours ago
Works like a charm, thanks a lot!
– Andreas
5 hours ago
Works like a charm, thanks a lot!
– Andreas
5 hours ago
add a comment |
5
Building on Ulrike’s answer,
documentclass{article}
usepackage{fmtcount}
usepackage{refcount}
usepackage[colorlinks=true]{hyperref}
newcommand{ordinalref}[1]{%
hyperref[#1]{ordinalstringnum{getrefnumber{#1}}}%
}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ordinalref{itm:1} item xyz...\
The first item xyz...
end{document}
It doesn't work for nested items, unless you change the reference format.
answered 2 hours ago
egregegreg
737k8919353263
Thanks, that also looks like a great solution and an even more flexible one than Ulrikes as it's more automated when adding/removing items. But is it possible to define the language for that to something different than english?
– Andreas
1 hour ago
1
@Andreasfmtcountsupports several languages, see its manual.
– egreg
1 hour ago
Took some time, but now I've got it working like I want it to, with the german genders, thank you VERY much!
– Andreas
56 mins ago
This won't work if you change the numbering in the enumerate e.g. to alph or roman, or in a nested enumerate (which uses (a) as label). It would be imho better to use zref instead of refcount for something like this.
– Ulrike Fischer
30 mins ago
add a comment |
5
Building on Ulrike’s answer,
documentclass{article}
usepackage{fmtcount}
usepackage{refcount}
usepackage[colorlinks=true]{hyperref}
newcommand{ordinalref}[1]{%
hyperref[#1]{ordinalstringnum{getrefnumber{#1}}}%
}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ordinalref{itm:1} item xyz...\
The first item xyz...
end{document}
It doesn't work for nested items, unless you change the reference format.
answered 2 hours ago
egregegreg
737k8919353263
Thanks, that also looks like a great solution and an even more flexible one than Ulrikes as it's more automated when adding/removing items. But is it possible to define the language for that to something different than english?
– Andreas
1 hour ago
1
@Andreasfmtcountsupports several languages, see its manual.
– egreg
1 hour ago
Took some time, but now I've got it working like I want it to, with the german genders, thank you VERY much!
– Andreas
56 mins ago
This won't work if you change the numbering in the enumerate e.g. to alph or roman, or in a nested enumerate (which uses (a) as label). It would be imho better to use zref instead of refcount for something like this.
– Ulrike Fischer
30 mins ago
add a comment |
5
5
5
Building on Ulrike’s answer,
documentclass{article}
usepackage{fmtcount}
usepackage{refcount}
usepackage[colorlinks=true]{hyperref}
newcommand{ordinalref}[1]{%
hyperref[#1]{ordinalstringnum{getrefnumber{#1}}}%
}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ordinalref{itm:1} item xyz...\
The first item xyz...
end{document}
It doesn't work for nested items, unless you change the reference format.
answered 2 hours ago
egregegreg
737k8919353263
Building on Ulrike’s answer,
documentclass{article}
usepackage{fmtcount}
usepackage{refcount}
usepackage[colorlinks=true]{hyperref}
newcommand{ordinalref}[1]{%
hyperref[#1]{ordinalstringnum{getrefnumber{#1}}}%
}
begin{document}
begin{enumerate}
item Item1 label{itm:1}
end{enumerate}
Item ref{itm:1} xyz...\
The ordinalref{itm:1} item xyz...\
The first item xyz...
end{document}
It doesn't work for nested items, unless you change the reference format.
answered 2 hours ago
egregegreg
737k8919353263
answered 2 hours ago
egregegreg
737k8919353263
answered 2 hours ago
egregegreg
737k8919353263
answered 2 hours ago
egregegreg
737k8919353263
737k8919353263
Thanks, that also looks like a great solution and an even more flexible one than Ulrikes as it's more automated when adding/removing items. But is it possible to define the language for that to something different than english?
– Andreas
1 hour ago
1
@Andreasfmtcountsupports several languages, see its manual.
– egreg
1 hour ago
Took some time, but now I've got it working like I want it to, with the german genders, thank you VERY much!
– Andreas
56 mins ago
This won't work if you change the numbering in the enumerate e.g. to alph or roman, or in a nested enumerate (which uses (a) as label). It would be imho better to use zref instead of refcount for something like this.
– Ulrike Fischer
30 mins ago
add a comment |
Thanks, that also looks like a great solution and an even more flexible one than Ulrikes as it's more automated when adding/removing items. But is it possible to define the language for that to something different than english?
– Andreas
1 hour ago
1
@Andreasfmtcountsupports several languages, see its manual.
– egreg
1 hour ago
Took some time, but now I've got it working like I want it to, with the german genders, thank you VERY much!
– Andreas
56 mins ago
This won't work if you change the numbering in the enumerate e.g. to alph or roman, or in a nested enumerate (which uses (a) as label). It would be imho better to use zref instead of refcount for something like this.
– Ulrike Fischer
30 mins ago
Thanks, that also looks like a great solution and an even more flexible one than Ulrikes as it's more automated when adding/removing items. But is it possible to define the language for that to something different than english?
– Andreas
1 hour ago
Thanks, that also looks like a great solution and an even more flexible one than Ulrikes as it's more automated when adding/removing items. But is it possible to define the language for that to something different than english?
– Andreas
1 hour ago
1
1
@Andreas
fmtcount supports several languages, see its manual.– egreg
1 hour ago
@Andreas
fmtcount supports several languages, see its manual.– egreg
1 hour ago
Took some time, but now I've got it working like I want it to, with the german genders, thank you VERY much!
– Andreas
56 mins ago
Took some time, but now I've got it working like I want it to, with the german genders, thank you VERY much!
– Andreas
56 mins ago
This won't work if you change the numbering in the enumerate e.g. to alph or roman, or in a nested enumerate (which uses (a) as label). It would be imho better to use zref instead of refcount for something like this.
– Ulrike Fischer
30 mins ago
This won't work if you change the numbering in the enumerate e.g. to alph or roman, or in a nested enumerate (which uses (a) as label). It would be imho better to use zref instead of refcount for something like this.
– Ulrike Fischer
30 mins ago
add a comment |
Andreas is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
Andreas is a new contributor. Be nice, and check out our Code of Conduct.
Andreas is a new contributor. Be nice, and check out our Code of Conduct.
Andreas is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f487498%2ffirst-instead-of-1-when-referencing%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
Welcome to TeX - LaTeX!
– Andrew Swann
5 hours ago