Raspberry pi 3 B with Ubuntu 18.04 server arm64: what chip
2
How can I find what chip I have (what version of raspberry pi) with Ubuntu 18.04 server for arm64? What file can I check or what command can I run? /proc/cpuinfo does not have return useful information, just some generic details without mention of the pi.
18.04 raspberrypi
asked 2 hours ago
anvoiceanvoice
215
New contributor
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
2
How can I find what chip I have (what version of raspberry pi) with Ubuntu 18.04 server for arm64? What file can I check or what command can I run? /proc/cpuinfo does not have return useful information, just some generic details without mention of the pi.
18.04 raspberrypi
asked 2 hours ago
anvoiceanvoice
215
New contributor
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Thecat /proc/cpuinfoshould produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…
– Terrance
1 hour ago
It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".
– anvoice
45 mins ago
You might be at an impasse with this because the RP does not support SMBIOS or DMI that allows for reading board information. It might also be something you might have to file as a bug to get the revision read in the cpuinfo.
– Terrance
14 mins ago
add a comment |
2
2
2
How can I find what chip I have (what version of raspberry pi) with Ubuntu 18.04 server for arm64? What file can I check or what command can I run? /proc/cpuinfo does not have return useful information, just some generic details without mention of the pi.
18.04 raspberrypi
asked 2 hours ago
anvoiceanvoice
215
New contributor
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
How can I find what chip I have (what version of raspberry pi) with Ubuntu 18.04 server for arm64? What file can I check or what command can I run? /proc/cpuinfo does not have return useful information, just some generic details without mention of the pi.
18.04 raspberrypi
18.04 raspberrypi
asked 2 hours ago
anvoiceanvoice
215
New contributor
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 2 hours ago
anvoiceanvoice
215
New contributor
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 2 hours ago
anvoiceanvoice
215
New contributor
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 2 hours ago
anvoiceanvoice
215
asked 2 hours ago
anvoiceanvoice
215
215
New contributor
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
anvoice is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Thecat /proc/cpuinfoshould produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…
– Terrance
1 hour ago
It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".
– anvoice
45 mins ago
You might be at an impasse with this because the RP does not support SMBIOS or DMI that allows for reading board information. It might also be something you might have to file as a bug to get the revision read in the cpuinfo.
– Terrance
14 mins ago
add a comment |
Thecat /proc/cpuinfoshould produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…
– Terrance
1 hour ago
It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".
– anvoice
45 mins ago
You might be at an impasse with this because the RP does not support SMBIOS or DMI that allows for reading board information. It might also be something you might have to file as a bug to get the revision read in the cpuinfo.
– Terrance
14 mins ago
The
cat /proc/cpuinfo should produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…– Terrance
1 hour ago
The
cat /proc/cpuinfo should produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…– Terrance
1 hour ago
It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".
– anvoice
45 mins ago
It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".
– anvoice
45 mins ago
You might be at an impasse with this because the RP does not support SMBIOS or DMI that allows for reading board information. It might also be something you might have to file as a bug to get the revision read in the cpuinfo.
– Terrance
14 mins ago
You might be at an impasse with this because the RP does not support SMBIOS or DMI that allows for reading board information. It might also be something you might have to file as a bug to get the revision read in the cpuinfo.
– Terrance
14 mins ago
add a comment |
1 Answer
1
active
oldest
votes
3
The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):
lscpu
Which produces the following output:
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 4
Model name: ARMv7 Processor rev 4 (v7l)
CPU max MHz: 1200,0000
CPU min MHz: 600,0000
BogoMIPS: 38.40
Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:
inxi -C
Which produce the following output:
CPU: Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM)
clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz
As for identifying which chip is build on your board you can check the chip on the board as well the manufacturers website for info and as well as the different selling outlets for getting technical details.
answered 2 hours ago
VideonauthVideonauth
24.7k1273102
Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?
– anvoice
1 hour ago
Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.
– Videonauth
1 hour ago
I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.
– anvoice
1 hour ago
1
As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.
– Videonauth
1 hour ago
1
Current inxi (3.0.xx) has way better ARM support than legacy inxi (2.xx.yy), which I think is what you find in 18-4. That will do its level best to give quite a bit of information about the actual SBC device itself. On rasberry pi 3 the only thing it's not catching is the mmc wifi device, which is too complicated to grab data on, but otherwise the report for pi 3 is quite complete in new inxi. Legacy inxi had only rudimentary ARM support. Compare inxi -Fxxx or -v7 on legacy and current on any pi device and you'll see what I mean.
– Lizardx
23 mins ago
|
show 2 more comments
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
anvoice is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1130244%2fraspberry-pi-3-b-with-ubuntu-18-04-server-arm64-what-chip%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
3
The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):
lscpu
Which produces the following output:
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 4
Model name: ARMv7 Processor rev 4 (v7l)
CPU max MHz: 1200,0000
CPU min MHz: 600,0000
BogoMIPS: 38.40
Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:
inxi -C
Which produce the following output:
CPU: Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM)
clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz
As for identifying which chip is build on your board you can check the chip on the board as well the manufacturers website for info and as well as the different selling outlets for getting technical details.
answered 2 hours ago
VideonauthVideonauth
24.7k1273102
Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?
– anvoice
1 hour ago
Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.
– Videonauth
1 hour ago
I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.
– anvoice
1 hour ago
1
As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.
– Videonauth
1 hour ago
1
Current inxi (3.0.xx) has way better ARM support than legacy inxi (2.xx.yy), which I think is what you find in 18-4. That will do its level best to give quite a bit of information about the actual SBC device itself. On rasberry pi 3 the only thing it's not catching is the mmc wifi device, which is too complicated to grab data on, but otherwise the report for pi 3 is quite complete in new inxi. Legacy inxi had only rudimentary ARM support. Compare inxi -Fxxx or -v7 on legacy and current on any pi device and you'll see what I mean.
– Lizardx
23 mins ago
|
show 2 more comments
3
The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):
lscpu
Which produces the following output:
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 4
Model name: ARMv7 Processor rev 4 (v7l)
CPU max MHz: 1200,0000
CPU min MHz: 600,0000
BogoMIPS: 38.40
Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:
inxi -C
Which produce the following output:
CPU: Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM)
clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz
As for identifying which chip is build on your board you can check the chip on the board as well the manufacturers website for info and as well as the different selling outlets for getting technical details.
answered 2 hours ago
VideonauthVideonauth
24.7k1273102
Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?
– anvoice
1 hour ago
Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.
– Videonauth
1 hour ago
I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.
– anvoice
1 hour ago
1
As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.
– Videonauth
1 hour ago
1
Current inxi (3.0.xx) has way better ARM support than legacy inxi (2.xx.yy), which I think is what you find in 18-4. That will do its level best to give quite a bit of information about the actual SBC device itself. On rasberry pi 3 the only thing it's not catching is the mmc wifi device, which is too complicated to grab data on, but otherwise the report for pi 3 is quite complete in new inxi. Legacy inxi had only rudimentary ARM support. Compare inxi -Fxxx or -v7 on legacy and current on any pi device and you'll see what I mean.
– Lizardx
23 mins ago
|
show 2 more comments
3
3
3
The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):
lscpu
Which produces the following output:
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 4
Model name: ARMv7 Processor rev 4 (v7l)
CPU max MHz: 1200,0000
CPU min MHz: 600,0000
BogoMIPS: 38.40
Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:
inxi -C
Which produce the following output:
CPU: Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM)
clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz
As for identifying which chip is build on your board you can check the chip on the board as well the manufacturers website for info and as well as the different selling outlets for getting technical details.
answered 2 hours ago
VideonauthVideonauth
24.7k1273102
The command lscpu is what you look for. Here's an example output of the command (taken on my Raspberry Pi 3B+):
lscpu
Which produces the following output:
Architecture: armv7l
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 4
Model name: ARMv7 Processor rev 4 (v7l)
CPU max MHz: 1200,0000
CPU min MHz: 600,0000
BogoMIPS: 38.40
Flags: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
Another option is the inxi command (you might have to install it if not present with sudo apt install inxi). The flags to use are as follows:
inxi -C
Which produce the following output:
CPU: Quad core ARMv7 rev 4 (v7l) (-MCP-) (ARM)
clock speeds: max: 1200 MHz 1: 1200 MHz 2: 1200 MHz 3: 1200 MHz 4: 1200 MHz
As for identifying which chip is build on your board you can check the chip on the board as well the manufacturers website for info and as well as the different selling outlets for getting technical details.
answered 2 hours ago
VideonauthVideonauth
24.7k1273102
edited 1 hour ago
answered 2 hours ago
VideonauthVideonauth
24.7k1273102
answered 2 hours ago
VideonauthVideonauth
24.7k1273102
answered 2 hours ago
VideonauthVideonauth
24.7k1273102
24.7k1273102
Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?
– anvoice
1 hour ago
Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.
– Videonauth
1 hour ago
I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.
– anvoice
1 hour ago
1
As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.
– Videonauth
1 hour ago
1
Current inxi (3.0.xx) has way better ARM support than legacy inxi (2.xx.yy), which I think is what you find in 18-4. That will do its level best to give quite a bit of information about the actual SBC device itself. On rasberry pi 3 the only thing it's not catching is the mmc wifi device, which is too complicated to grab data on, but otherwise the report for pi 3 is quite complete in new inxi. Legacy inxi had only rudimentary ARM support. Compare inxi -Fxxx or -v7 on legacy and current on any pi device and you'll see what I mean.
– Lizardx
23 mins ago
|
show 2 more comments
Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?
– anvoice
1 hour ago
Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.
– Videonauth
1 hour ago
I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.
– anvoice
1 hour ago
1
As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.
– Videonauth
1 hour ago
1
Current inxi (3.0.xx) has way better ARM support than legacy inxi (2.xx.yy), which I think is what you find in 18-4. That will do its level best to give quite a bit of information about the actual SBC device itself. On rasberry pi 3 the only thing it's not catching is the mmc wifi device, which is too complicated to grab data on, but otherwise the report for pi 3 is quite complete in new inxi. Legacy inxi had only rudimentary ARM support. Compare inxi -Fxxx or -v7 on legacy and current on any pi device and you'll see what I mean.
– Lizardx
23 mins ago
Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?
– anvoice
1 hour ago
Thank you, that definitely gives extra information. However, the model name when I run lscpu is listed as Cortex A-53, which is on both the pi 2 and 3 I believe. Do you happen to know of a more specific command/file which can distinguish between these two boards?
– anvoice
1 hour ago
Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.
– Videonauth
1 hour ago
Normaly the board type and revision is printed on the board too, so you might be able to check that, otherwise I'm out of clues.
– Videonauth
1 hour ago
I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.
– anvoice
1 hour ago
I see. I know what my board is, but a library maintainer needs this info to adjust his library to work with my hardware and software. Tried inxi, it also gives generic output only. Really appreciate the help though.
– anvoice
1 hour ago
1
1
As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.
– Videonauth
1 hour ago
As for the library you want to use, there's only one question. is there a library which provides the same function you need or not. This is the information you can get from your machine program wise. On desktop computers there might be more information to get on the CPU version, the raspberry lacks in that regard a bit as putting all this information in some chips is adding to the costs.
– Videonauth
1 hour ago
1
1
Current inxi (3.0.xx) has way better ARM support than legacy inxi (2.xx.yy), which I think is what you find in 18-4. That will do its level best to give quite a bit of information about the actual SBC device itself. On rasberry pi 3 the only thing it's not catching is the mmc wifi device, which is too complicated to grab data on, but otherwise the report for pi 3 is quite complete in new inxi. Legacy inxi had only rudimentary ARM support. Compare inxi -Fxxx or -v7 on legacy and current on any pi device and you'll see what I mean.
– Lizardx
23 mins ago
Current inxi (3.0.xx) has way better ARM support than legacy inxi (2.xx.yy), which I think is what you find in 18-4. That will do its level best to give quite a bit of information about the actual SBC device itself. On rasberry pi 3 the only thing it's not catching is the mmc wifi device, which is too complicated to grab data on, but otherwise the report for pi 3 is quite complete in new inxi. Legacy inxi had only rudimentary ARM support. Compare inxi -Fxxx or -v7 on legacy and current on any pi device and you'll see what I mean.
– Lizardx
23 mins ago
|
show 2 more comments
anvoice is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
anvoice is a new contributor. Be nice, and check out our Code of Conduct.
anvoice is a new contributor. Be nice, and check out our Code of Conduct.
anvoice is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1130244%2fraspberry-pi-3-b-with-ubuntu-18-04-server-arm64-what-chip%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
The
cat /proc/cpuinfoshould produce a Revision number that corresponds to the board. See: raspberrypi.org/documentation/hardware/raspberrypi/…– Terrance
1 hour ago
It doesnt't, at least for Ubuntu 18.04 server. It only says "revision : 4".
– anvoice
45 mins ago
You might be at an impasse with this because the RP does not support SMBIOS or DMI that allows for reading board information. It might also be something you might have to file as a bug to get the revision read in the cpuinfo.
– Terrance
14 mins ago