Method of characteristics for $f f_x + f_y = 1$. Where is the solution valid?
$begingroup$
Suppose we have a PDE that can be solved with the method of characteristics
begin{align}
F(nabla u, u , x) = 0 text{ in $U$}\
u|_Gamma = g text{ on $Gamma$ }
end{align}
Where $Gamma subset partial U$. Suppose the characteristic curves starting on $Gamma$ don't span the whole set $U$, what can we say about the solution in this points outside the span? Do we lack information to solve the problem or can this be somehow avoided?
To have a precise example I solved the following problem,
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 qquadtext{with}qquad f(t,t) = frac{t}{2} quadtext{for}quad 0 < t < 1.$$
In the above notation we have $Gamma = {(t,t): 0 < t < 1}$ and $g(t) = t/2$. I got the solution $f(x,y) = z(s) + g(x(0)) =z(s) + frac{x_0}{2} = y - frac{x - 1/2y^2}{2-y}$ where $y neq 2$, what can I say about the validity of my solution? Is it valid for $mathbb{R^2}$ or just for points $x, y$ such that the characteristic curve trough them, $(x(s),y(s))$ lies on $Gamma$ for $s=0$?
pde characteristics
$endgroup$
add a comment |
$begingroup$
Suppose we have a PDE that can be solved with the method of characteristics
begin{align}
F(nabla u, u , x) = 0 text{ in $U$}\
u|_Gamma = g text{ on $Gamma$ }
end{align}
Where $Gamma subset partial U$. Suppose the characteristic curves starting on $Gamma$ don't span the whole set $U$, what can we say about the solution in this points outside the span? Do we lack information to solve the problem or can this be somehow avoided?
To have a precise example I solved the following problem,
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 qquadtext{with}qquad f(t,t) = frac{t}{2} quadtext{for}quad 0 < t < 1.$$
In the above notation we have $Gamma = {(t,t): 0 < t < 1}$ and $g(t) = t/2$. I got the solution $f(x,y) = z(s) + g(x(0)) =z(s) + frac{x_0}{2} = y - frac{x - 1/2y^2}{2-y}$ where $y neq 2$, what can I say about the validity of my solution? Is it valid for $mathbb{R^2}$ or just for points $x, y$ such that the characteristic curve trough them, $(x(s),y(s))$ lies on $Gamma$ for $s=0$?
pde characteristics
$endgroup$
add a comment |
$begingroup$
Suppose we have a PDE that can be solved with the method of characteristics
begin{align}
F(nabla u, u , x) = 0 text{ in $U$}\
u|_Gamma = g text{ on $Gamma$ }
end{align}
Where $Gamma subset partial U$. Suppose the characteristic curves starting on $Gamma$ don't span the whole set $U$, what can we say about the solution in this points outside the span? Do we lack information to solve the problem or can this be somehow avoided?
To have a precise example I solved the following problem,
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 qquadtext{with}qquad f(t,t) = frac{t}{2} quadtext{for}quad 0 < t < 1.$$
In the above notation we have $Gamma = {(t,t): 0 < t < 1}$ and $g(t) = t/2$. I got the solution $f(x,y) = z(s) + g(x(0)) =z(s) + frac{x_0}{2} = y - frac{x - 1/2y^2}{2-y}$ where $y neq 2$, what can I say about the validity of my solution? Is it valid for $mathbb{R^2}$ or just for points $x, y$ such that the characteristic curve trough them, $(x(s),y(s))$ lies on $Gamma$ for $s=0$?
pde characteristics
$endgroup$
Suppose we have a PDE that can be solved with the method of characteristics
begin{align}
F(nabla u, u , x) = 0 text{ in $U$}\
u|_Gamma = g text{ on $Gamma$ }
end{align}
Where $Gamma subset partial U$. Suppose the characteristic curves starting on $Gamma$ don't span the whole set $U$, what can we say about the solution in this points outside the span? Do we lack information to solve the problem or can this be somehow avoided?
To have a precise example I solved the following problem,
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 qquadtext{with}qquad f(t,t) = frac{t}{2} quadtext{for}quad 0 < t < 1.$$
In the above notation we have $Gamma = {(t,t): 0 < t < 1}$ and $g(t) = t/2$. I got the solution $f(x,y) = z(s) + g(x(0)) =z(s) + frac{x_0}{2} = y - frac{x - 1/2y^2}{2-y}$ where $y neq 2$, what can I say about the validity of my solution? Is it valid for $mathbb{R^2}$ or just for points $x, y$ such that the characteristic curve trough them, $(x(s),y(s))$ lies on $Gamma$ for $s=0$?
pde characteristics
pde characteristics
edited Dec 7 '18 at 18:12
Harry49
6,17331132
6,17331132
asked Dec 5 '18 at 10:41
h3h325h3h325
19410
19410
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
$begingroup$
This PDE is a non-homogeneous inviscid Burgers' equation. Let us apply the method of characteristics:
$frac{text d y}{text ds} = 1$, letting $y(0) = t$, we know $y = t + s$
$frac{text d f}{text ds} = 1$, letting $f(0) = t/2$, we know $f = t/2 + s$
$frac{text d x}{text ds} = f$, letting $x(0) = t$, we know $x = t + s(t + s)/2$
Therefore, the characteristics are the curves $x = t + y(y-t)/2$ for $0<t<1$, along which $f$ is given by
$$
f(x,y) = y - frac{x-y^2/2}{2-y} , .
$$
One can note that this expression is not defined at $y=2$, where the denominator vanishes. The solution is only valid over the domain in yellow
$$
(x,y) in lbrace (t + y(y-t)/2, y), 0<t<1, y<2rbrace
$$
Indeed, we start following characteristic curves at some point $(t,t)$ with $0<t<1$. On the one hand, we can decrease $y$ without restriction. But on the other hand, we cannot increase $y$ further than $y=2^-$. At the point $(x,y) = (2,2)$, all characteristic curves coming from $lbrace(t,t), 0<t<1rbrace$ intersect. The classical solution collapses (similar case to this one).
The reason why the domain of validity is restricted to $y<2$ can be compared to the case of the Riccati ODE initial-value problem
$$
x'(t) = -x(t)^2 qquadtext{with}qquad x(0) = -1, .
$$
Indeed, the solution $x(t) = frac{1}{t-1}$ blows up at $t=1$ and cannot be used for larger times (even if the solution function is defined for $t>1$). Note that this simple ODE problem can be linked to the PDE problem by following a derivation by Lax, leading to Eq. (6.10) p. 36 of (1).
(1) P.D. Lax, Hyperbolic systems of conservation laws and the mathematical theory of shock waves, SIAM, 1973 doi:10.1137/1.9781611970562.ch1
$endgroup$
$begingroup$
Why is the solution only valid on the domain in yellow when $f(x,y)$ is defined for all $x$, $y neq 2$ ? It seems to me that the validity of the solution still holds outside although we might lose unicity since the associated system of ODE does not have initial conditions.
$endgroup$
– h3h325
Dec 5 '18 at 15:45
$begingroup$
I understand why the solution is not valid for $y =2$, I also see why the idea behind the method should fail if the characteristic curves intersect. But as I see it for $y>2$ the function $f(x,y)$ satisfies the pde and also the initial condition, so why can we not take it as a solution? Thanks a lot for the answer by the way.
$endgroup$
– h3h325
Dec 5 '18 at 16:12
$begingroup$
I see! So the conclusion is that the solution still holds but we cannot guarantee uniqueness, right?
$endgroup$
– h3h325
Dec 5 '18 at 16:22
$begingroup$
Sorry if im beeing too picky but I still don't get your point. The system of ODEs does have a solution by Picard-Lindelöf (even if it is not unique), since 1, 1 and $f$ are lipschitz, for any $[S, infty)$, for some $S$ corresponding to $y >2$, so why are we losing existence? Also $f(x,y)$ satisfies the PDE everywhere where it is defined, and also the initial conditions. So how is $f$ not a solution? Could you maybe refer me somewhere were this is explained?
$endgroup$
– h3h325
Dec 5 '18 at 16:43
1
$begingroup$
@h3h325 I'm troubled by your statement about Picard Lindelof, please note that it is a local existence and uniqueness theorem
$endgroup$
– qbert
Dec 7 '18 at 18:24
|
show 1 more comment
$begingroup$
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 tag 1$$
Charpit-Lagrange equations :
$$frac{dx}{f}=frac{dy}{1}=frac{df}{1}$$
First family of characteristic curves, from $frac{dy}{1}=frac{df}{1}$ :
$$f-y=c_1$$
Second family of characteristic curves, from $frac{dx}{f}=frac{df}{1}$
$$frac12 f^2-x=c_2$$
General solution of the PDE expressed on the form of implicit equation :
$$frac12 f^2-x=Phi(f-y) tag 2$$
Where $Phi$ is an arbitrary function, to be determined according to boundary condition.
Condition : $f(x,x)=frac{x}{2}$
$frac12 (frac{x}{2})^2-x=Phi(frac{x}{2}-x)quad;quad frac{x^2}{8}-x=Phi(-frac{x}{2})$
Let $X=-frac{x}{2}quad;quad x=-2X$
$ frac{(-2X)^2}{8}-(-2X)=Phi(X)$
$$Phi(X)=frac12 X^2+2X$$
So, the function $Phi$ is determined. We put it into the general solution Eq.$(2)$ where $X=f-y$ :
$$frac12 f^2-x=frac12 (f-y)^2+2(f-y)$$
After simplification :
$$f(x,y)=frac{y^2-4y+2x}{2y-4}qquad yneq 2.$$
This is the solution of the PDE which satisfies the boundary condition.
One can check that this solution is valid in putting it into the PDE.
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "69"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmath.stackexchange.com%2fquestions%2f3026922%2fmethod-of-characteristics-for-f-f-x-f-y-1-where-is-the-solution-valid%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
This PDE is a non-homogeneous inviscid Burgers' equation. Let us apply the method of characteristics:
$frac{text d y}{text ds} = 1$, letting $y(0) = t$, we know $y = t + s$
$frac{text d f}{text ds} = 1$, letting $f(0) = t/2$, we know $f = t/2 + s$
$frac{text d x}{text ds} = f$, letting $x(0) = t$, we know $x = t + s(t + s)/2$
Therefore, the characteristics are the curves $x = t + y(y-t)/2$ for $0<t<1$, along which $f$ is given by
$$
f(x,y) = y - frac{x-y^2/2}{2-y} , .
$$
One can note that this expression is not defined at $y=2$, where the denominator vanishes. The solution is only valid over the domain in yellow
$$
(x,y) in lbrace (t + y(y-t)/2, y), 0<t<1, y<2rbrace
$$
Indeed, we start following characteristic curves at some point $(t,t)$ with $0<t<1$. On the one hand, we can decrease $y$ without restriction. But on the other hand, we cannot increase $y$ further than $y=2^-$. At the point $(x,y) = (2,2)$, all characteristic curves coming from $lbrace(t,t), 0<t<1rbrace$ intersect. The classical solution collapses (similar case to this one).
The reason why the domain of validity is restricted to $y<2$ can be compared to the case of the Riccati ODE initial-value problem
$$
x'(t) = -x(t)^2 qquadtext{with}qquad x(0) = -1, .
$$
Indeed, the solution $x(t) = frac{1}{t-1}$ blows up at $t=1$ and cannot be used for larger times (even if the solution function is defined for $t>1$). Note that this simple ODE problem can be linked to the PDE problem by following a derivation by Lax, leading to Eq. (6.10) p. 36 of (1).
(1) P.D. Lax, Hyperbolic systems of conservation laws and the mathematical theory of shock waves, SIAM, 1973 doi:10.1137/1.9781611970562.ch1
$endgroup$
$begingroup$
Why is the solution only valid on the domain in yellow when $f(x,y)$ is defined for all $x$, $y neq 2$ ? It seems to me that the validity of the solution still holds outside although we might lose unicity since the associated system of ODE does not have initial conditions.
$endgroup$
– h3h325
Dec 5 '18 at 15:45
$begingroup$
I understand why the solution is not valid for $y =2$, I also see why the idea behind the method should fail if the characteristic curves intersect. But as I see it for $y>2$ the function $f(x,y)$ satisfies the pde and also the initial condition, so why can we not take it as a solution? Thanks a lot for the answer by the way.
$endgroup$
– h3h325
Dec 5 '18 at 16:12
$begingroup$
I see! So the conclusion is that the solution still holds but we cannot guarantee uniqueness, right?
$endgroup$
– h3h325
Dec 5 '18 at 16:22
$begingroup$
Sorry if im beeing too picky but I still don't get your point. The system of ODEs does have a solution by Picard-Lindelöf (even if it is not unique), since 1, 1 and $f$ are lipschitz, for any $[S, infty)$, for some $S$ corresponding to $y >2$, so why are we losing existence? Also $f(x,y)$ satisfies the PDE everywhere where it is defined, and also the initial conditions. So how is $f$ not a solution? Could you maybe refer me somewhere were this is explained?
$endgroup$
– h3h325
Dec 5 '18 at 16:43
1
$begingroup$
@h3h325 I'm troubled by your statement about Picard Lindelof, please note that it is a local existence and uniqueness theorem
$endgroup$
– qbert
Dec 7 '18 at 18:24
|
show 1 more comment
$begingroup$
This PDE is a non-homogeneous inviscid Burgers' equation. Let us apply the method of characteristics:
$frac{text d y}{text ds} = 1$, letting $y(0) = t$, we know $y = t + s$
$frac{text d f}{text ds} = 1$, letting $f(0) = t/2$, we know $f = t/2 + s$
$frac{text d x}{text ds} = f$, letting $x(0) = t$, we know $x = t + s(t + s)/2$
Therefore, the characteristics are the curves $x = t + y(y-t)/2$ for $0<t<1$, along which $f$ is given by
$$
f(x,y) = y - frac{x-y^2/2}{2-y} , .
$$
One can note that this expression is not defined at $y=2$, where the denominator vanishes. The solution is only valid over the domain in yellow
$$
(x,y) in lbrace (t + y(y-t)/2, y), 0<t<1, y<2rbrace
$$
Indeed, we start following characteristic curves at some point $(t,t)$ with $0<t<1$. On the one hand, we can decrease $y$ without restriction. But on the other hand, we cannot increase $y$ further than $y=2^-$. At the point $(x,y) = (2,2)$, all characteristic curves coming from $lbrace(t,t), 0<t<1rbrace$ intersect. The classical solution collapses (similar case to this one).
The reason why the domain of validity is restricted to $y<2$ can be compared to the case of the Riccati ODE initial-value problem
$$
x'(t) = -x(t)^2 qquadtext{with}qquad x(0) = -1, .
$$
Indeed, the solution $x(t) = frac{1}{t-1}$ blows up at $t=1$ and cannot be used for larger times (even if the solution function is defined for $t>1$). Note that this simple ODE problem can be linked to the PDE problem by following a derivation by Lax, leading to Eq. (6.10) p. 36 of (1).
(1) P.D. Lax, Hyperbolic systems of conservation laws and the mathematical theory of shock waves, SIAM, 1973 doi:10.1137/1.9781611970562.ch1
$endgroup$
$begingroup$
Why is the solution only valid on the domain in yellow when $f(x,y)$ is defined for all $x$, $y neq 2$ ? It seems to me that the validity of the solution still holds outside although we might lose unicity since the associated system of ODE does not have initial conditions.
$endgroup$
– h3h325
Dec 5 '18 at 15:45
$begingroup$
I understand why the solution is not valid for $y =2$, I also see why the idea behind the method should fail if the characteristic curves intersect. But as I see it for $y>2$ the function $f(x,y)$ satisfies the pde and also the initial condition, so why can we not take it as a solution? Thanks a lot for the answer by the way.
$endgroup$
– h3h325
Dec 5 '18 at 16:12
$begingroup$
I see! So the conclusion is that the solution still holds but we cannot guarantee uniqueness, right?
$endgroup$
– h3h325
Dec 5 '18 at 16:22
$begingroup$
Sorry if im beeing too picky but I still don't get your point. The system of ODEs does have a solution by Picard-Lindelöf (even if it is not unique), since 1, 1 and $f$ are lipschitz, for any $[S, infty)$, for some $S$ corresponding to $y >2$, so why are we losing existence? Also $f(x,y)$ satisfies the PDE everywhere where it is defined, and also the initial conditions. So how is $f$ not a solution? Could you maybe refer me somewhere were this is explained?
$endgroup$
– h3h325
Dec 5 '18 at 16:43
1
$begingroup$
@h3h325 I'm troubled by your statement about Picard Lindelof, please note that it is a local existence and uniqueness theorem
$endgroup$
– qbert
Dec 7 '18 at 18:24
|
show 1 more comment
$begingroup$
This PDE is a non-homogeneous inviscid Burgers' equation. Let us apply the method of characteristics:
$frac{text d y}{text ds} = 1$, letting $y(0) = t$, we know $y = t + s$
$frac{text d f}{text ds} = 1$, letting $f(0) = t/2$, we know $f = t/2 + s$
$frac{text d x}{text ds} = f$, letting $x(0) = t$, we know $x = t + s(t + s)/2$
Therefore, the characteristics are the curves $x = t + y(y-t)/2$ for $0<t<1$, along which $f$ is given by
$$
f(x,y) = y - frac{x-y^2/2}{2-y} , .
$$
One can note that this expression is not defined at $y=2$, where the denominator vanishes. The solution is only valid over the domain in yellow
$$
(x,y) in lbrace (t + y(y-t)/2, y), 0<t<1, y<2rbrace
$$
Indeed, we start following characteristic curves at some point $(t,t)$ with $0<t<1$. On the one hand, we can decrease $y$ without restriction. But on the other hand, we cannot increase $y$ further than $y=2^-$. At the point $(x,y) = (2,2)$, all characteristic curves coming from $lbrace(t,t), 0<t<1rbrace$ intersect. The classical solution collapses (similar case to this one).
The reason why the domain of validity is restricted to $y<2$ can be compared to the case of the Riccati ODE initial-value problem
$$
x'(t) = -x(t)^2 qquadtext{with}qquad x(0) = -1, .
$$
Indeed, the solution $x(t) = frac{1}{t-1}$ blows up at $t=1$ and cannot be used for larger times (even if the solution function is defined for $t>1$). Note that this simple ODE problem can be linked to the PDE problem by following a derivation by Lax, leading to Eq. (6.10) p. 36 of (1).
(1) P.D. Lax, Hyperbolic systems of conservation laws and the mathematical theory of shock waves, SIAM, 1973 doi:10.1137/1.9781611970562.ch1
$endgroup$
This PDE is a non-homogeneous inviscid Burgers' equation. Let us apply the method of characteristics:
$frac{text d y}{text ds} = 1$, letting $y(0) = t$, we know $y = t + s$
$frac{text d f}{text ds} = 1$, letting $f(0) = t/2$, we know $f = t/2 + s$
$frac{text d x}{text ds} = f$, letting $x(0) = t$, we know $x = t + s(t + s)/2$
Therefore, the characteristics are the curves $x = t + y(y-t)/2$ for $0<t<1$, along which $f$ is given by
$$
f(x,y) = y - frac{x-y^2/2}{2-y} , .
$$
One can note that this expression is not defined at $y=2$, where the denominator vanishes. The solution is only valid over the domain in yellow
$$
(x,y) in lbrace (t + y(y-t)/2, y), 0<t<1, y<2rbrace
$$
Indeed, we start following characteristic curves at some point $(t,t)$ with $0<t<1$. On the one hand, we can decrease $y$ without restriction. But on the other hand, we cannot increase $y$ further than $y=2^-$. At the point $(x,y) = (2,2)$, all characteristic curves coming from $lbrace(t,t), 0<t<1rbrace$ intersect. The classical solution collapses (similar case to this one).
The reason why the domain of validity is restricted to $y<2$ can be compared to the case of the Riccati ODE initial-value problem
$$
x'(t) = -x(t)^2 qquadtext{with}qquad x(0) = -1, .
$$
Indeed, the solution $x(t) = frac{1}{t-1}$ blows up at $t=1$ and cannot be used for larger times (even if the solution function is defined for $t>1$). Note that this simple ODE problem can be linked to the PDE problem by following a derivation by Lax, leading to Eq. (6.10) p. 36 of (1).
(1) P.D. Lax, Hyperbolic systems of conservation laws and the mathematical theory of shock waves, SIAM, 1973 doi:10.1137/1.9781611970562.ch1
edited Dec 8 '18 at 11:05
answered Dec 5 '18 at 14:09
Harry49Harry49
6,17331132
6,17331132
$begingroup$
Why is the solution only valid on the domain in yellow when $f(x,y)$ is defined for all $x$, $y neq 2$ ? It seems to me that the validity of the solution still holds outside although we might lose unicity since the associated system of ODE does not have initial conditions.
$endgroup$
– h3h325
Dec 5 '18 at 15:45
$begingroup$
I understand why the solution is not valid for $y =2$, I also see why the idea behind the method should fail if the characteristic curves intersect. But as I see it for $y>2$ the function $f(x,y)$ satisfies the pde and also the initial condition, so why can we not take it as a solution? Thanks a lot for the answer by the way.
$endgroup$
– h3h325
Dec 5 '18 at 16:12
$begingroup$
I see! So the conclusion is that the solution still holds but we cannot guarantee uniqueness, right?
$endgroup$
– h3h325
Dec 5 '18 at 16:22
$begingroup$
Sorry if im beeing too picky but I still don't get your point. The system of ODEs does have a solution by Picard-Lindelöf (even if it is not unique), since 1, 1 and $f$ are lipschitz, for any $[S, infty)$, for some $S$ corresponding to $y >2$, so why are we losing existence? Also $f(x,y)$ satisfies the PDE everywhere where it is defined, and also the initial conditions. So how is $f$ not a solution? Could you maybe refer me somewhere were this is explained?
$endgroup$
– h3h325
Dec 5 '18 at 16:43
1
$begingroup$
@h3h325 I'm troubled by your statement about Picard Lindelof, please note that it is a local existence and uniqueness theorem
$endgroup$
– qbert
Dec 7 '18 at 18:24
|
show 1 more comment
$begingroup$
Why is the solution only valid on the domain in yellow when $f(x,y)$ is defined for all $x$, $y neq 2$ ? It seems to me that the validity of the solution still holds outside although we might lose unicity since the associated system of ODE does not have initial conditions.
$endgroup$
– h3h325
Dec 5 '18 at 15:45
$begingroup$
I understand why the solution is not valid for $y =2$, I also see why the idea behind the method should fail if the characteristic curves intersect. But as I see it for $y>2$ the function $f(x,y)$ satisfies the pde and also the initial condition, so why can we not take it as a solution? Thanks a lot for the answer by the way.
$endgroup$
– h3h325
Dec 5 '18 at 16:12
$begingroup$
I see! So the conclusion is that the solution still holds but we cannot guarantee uniqueness, right?
$endgroup$
– h3h325
Dec 5 '18 at 16:22
$begingroup$
Sorry if im beeing too picky but I still don't get your point. The system of ODEs does have a solution by Picard-Lindelöf (even if it is not unique), since 1, 1 and $f$ are lipschitz, for any $[S, infty)$, for some $S$ corresponding to $y >2$, so why are we losing existence? Also $f(x,y)$ satisfies the PDE everywhere where it is defined, and also the initial conditions. So how is $f$ not a solution? Could you maybe refer me somewhere were this is explained?
$endgroup$
– h3h325
Dec 5 '18 at 16:43
1
$begingroup$
@h3h325 I'm troubled by your statement about Picard Lindelof, please note that it is a local existence and uniqueness theorem
$endgroup$
– qbert
Dec 7 '18 at 18:24
$begingroup$
Why is the solution only valid on the domain in yellow when $f(x,y)$ is defined for all $x$, $y neq 2$ ? It seems to me that the validity of the solution still holds outside although we might lose unicity since the associated system of ODE does not have initial conditions.
$endgroup$
– h3h325
Dec 5 '18 at 15:45
$begingroup$
Why is the solution only valid on the domain in yellow when $f(x,y)$ is defined for all $x$, $y neq 2$ ? It seems to me that the validity of the solution still holds outside although we might lose unicity since the associated system of ODE does not have initial conditions.
$endgroup$
– h3h325
Dec 5 '18 at 15:45
$begingroup$
I understand why the solution is not valid for $y =2$, I also see why the idea behind the method should fail if the characteristic curves intersect. But as I see it for $y>2$ the function $f(x,y)$ satisfies the pde and also the initial condition, so why can we not take it as a solution? Thanks a lot for the answer by the way.
$endgroup$
– h3h325
Dec 5 '18 at 16:12
$begingroup$
I understand why the solution is not valid for $y =2$, I also see why the idea behind the method should fail if the characteristic curves intersect. But as I see it for $y>2$ the function $f(x,y)$ satisfies the pde and also the initial condition, so why can we not take it as a solution? Thanks a lot for the answer by the way.
$endgroup$
– h3h325
Dec 5 '18 at 16:12
$begingroup$
I see! So the conclusion is that the solution still holds but we cannot guarantee uniqueness, right?
$endgroup$
– h3h325
Dec 5 '18 at 16:22
$begingroup$
I see! So the conclusion is that the solution still holds but we cannot guarantee uniqueness, right?
$endgroup$
– h3h325
Dec 5 '18 at 16:22
$begingroup$
Sorry if im beeing too picky but I still don't get your point. The system of ODEs does have a solution by Picard-Lindelöf (even if it is not unique), since 1, 1 and $f$ are lipschitz, for any $[S, infty)$, for some $S$ corresponding to $y >2$, so why are we losing existence? Also $f(x,y)$ satisfies the PDE everywhere where it is defined, and also the initial conditions. So how is $f$ not a solution? Could you maybe refer me somewhere were this is explained?
$endgroup$
– h3h325
Dec 5 '18 at 16:43
$begingroup$
Sorry if im beeing too picky but I still don't get your point. The system of ODEs does have a solution by Picard-Lindelöf (even if it is not unique), since 1, 1 and $f$ are lipschitz, for any $[S, infty)$, for some $S$ corresponding to $y >2$, so why are we losing existence? Also $f(x,y)$ satisfies the PDE everywhere where it is defined, and also the initial conditions. So how is $f$ not a solution? Could you maybe refer me somewhere were this is explained?
$endgroup$
– h3h325
Dec 5 '18 at 16:43
1
1
$begingroup$
@h3h325 I'm troubled by your statement about Picard Lindelof, please note that it is a local existence and uniqueness theorem
$endgroup$
– qbert
Dec 7 '18 at 18:24
$begingroup$
@h3h325 I'm troubled by your statement about Picard Lindelof, please note that it is a local existence and uniqueness theorem
$endgroup$
– qbert
Dec 7 '18 at 18:24
|
show 1 more comment
$begingroup$
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 tag 1$$
Charpit-Lagrange equations :
$$frac{dx}{f}=frac{dy}{1}=frac{df}{1}$$
First family of characteristic curves, from $frac{dy}{1}=frac{df}{1}$ :
$$f-y=c_1$$
Second family of characteristic curves, from $frac{dx}{f}=frac{df}{1}$
$$frac12 f^2-x=c_2$$
General solution of the PDE expressed on the form of implicit equation :
$$frac12 f^2-x=Phi(f-y) tag 2$$
Where $Phi$ is an arbitrary function, to be determined according to boundary condition.
Condition : $f(x,x)=frac{x}{2}$
$frac12 (frac{x}{2})^2-x=Phi(frac{x}{2}-x)quad;quad frac{x^2}{8}-x=Phi(-frac{x}{2})$
Let $X=-frac{x}{2}quad;quad x=-2X$
$ frac{(-2X)^2}{8}-(-2X)=Phi(X)$
$$Phi(X)=frac12 X^2+2X$$
So, the function $Phi$ is determined. We put it into the general solution Eq.$(2)$ where $X=f-y$ :
$$frac12 f^2-x=frac12 (f-y)^2+2(f-y)$$
After simplification :
$$f(x,y)=frac{y^2-4y+2x}{2y-4}qquad yneq 2.$$
This is the solution of the PDE which satisfies the boundary condition.
One can check that this solution is valid in putting it into the PDE.
$endgroup$
add a comment |
$begingroup$
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 tag 1$$
Charpit-Lagrange equations :
$$frac{dx}{f}=frac{dy}{1}=frac{df}{1}$$
First family of characteristic curves, from $frac{dy}{1}=frac{df}{1}$ :
$$f-y=c_1$$
Second family of characteristic curves, from $frac{dx}{f}=frac{df}{1}$
$$frac12 f^2-x=c_2$$
General solution of the PDE expressed on the form of implicit equation :
$$frac12 f^2-x=Phi(f-y) tag 2$$
Where $Phi$ is an arbitrary function, to be determined according to boundary condition.
Condition : $f(x,x)=frac{x}{2}$
$frac12 (frac{x}{2})^2-x=Phi(frac{x}{2}-x)quad;quad frac{x^2}{8}-x=Phi(-frac{x}{2})$
Let $X=-frac{x}{2}quad;quad x=-2X$
$ frac{(-2X)^2}{8}-(-2X)=Phi(X)$
$$Phi(X)=frac12 X^2+2X$$
So, the function $Phi$ is determined. We put it into the general solution Eq.$(2)$ where $X=f-y$ :
$$frac12 f^2-x=frac12 (f-y)^2+2(f-y)$$
After simplification :
$$f(x,y)=frac{y^2-4y+2x}{2y-4}qquad yneq 2.$$
This is the solution of the PDE which satisfies the boundary condition.
One can check that this solution is valid in putting it into the PDE.
$endgroup$
add a comment |
$begingroup$
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 tag 1$$
Charpit-Lagrange equations :
$$frac{dx}{f}=frac{dy}{1}=frac{df}{1}$$
First family of characteristic curves, from $frac{dy}{1}=frac{df}{1}$ :
$$f-y=c_1$$
Second family of characteristic curves, from $frac{dx}{f}=frac{df}{1}$
$$frac12 f^2-x=c_2$$
General solution of the PDE expressed on the form of implicit equation :
$$frac12 f^2-x=Phi(f-y) tag 2$$
Where $Phi$ is an arbitrary function, to be determined according to boundary condition.
Condition : $f(x,x)=frac{x}{2}$
$frac12 (frac{x}{2})^2-x=Phi(frac{x}{2}-x)quad;quad frac{x^2}{8}-x=Phi(-frac{x}{2})$
Let $X=-frac{x}{2}quad;quad x=-2X$
$ frac{(-2X)^2}{8}-(-2X)=Phi(X)$
$$Phi(X)=frac12 X^2+2X$$
So, the function $Phi$ is determined. We put it into the general solution Eq.$(2)$ where $X=f-y$ :
$$frac12 f^2-x=frac12 (f-y)^2+2(f-y)$$
After simplification :
$$f(x,y)=frac{y^2-4y+2x}{2y-4}qquad yneq 2.$$
This is the solution of the PDE which satisfies the boundary condition.
One can check that this solution is valid in putting it into the PDE.
$endgroup$
$$f(x,y)frac{partial f}{partial x} + frac{partial f}{partial y}= 1 tag 1$$
Charpit-Lagrange equations :
$$frac{dx}{f}=frac{dy}{1}=frac{df}{1}$$
First family of characteristic curves, from $frac{dy}{1}=frac{df}{1}$ :
$$f-y=c_1$$
Second family of characteristic curves, from $frac{dx}{f}=frac{df}{1}$
$$frac12 f^2-x=c_2$$
General solution of the PDE expressed on the form of implicit equation :
$$frac12 f^2-x=Phi(f-y) tag 2$$
Where $Phi$ is an arbitrary function, to be determined according to boundary condition.
Condition : $f(x,x)=frac{x}{2}$
$frac12 (frac{x}{2})^2-x=Phi(frac{x}{2}-x)quad;quad frac{x^2}{8}-x=Phi(-frac{x}{2})$
Let $X=-frac{x}{2}quad;quad x=-2X$
$ frac{(-2X)^2}{8}-(-2X)=Phi(X)$
$$Phi(X)=frac12 X^2+2X$$
So, the function $Phi$ is determined. We put it into the general solution Eq.$(2)$ where $X=f-y$ :
$$frac12 f^2-x=frac12 (f-y)^2+2(f-y)$$
After simplification :
$$f(x,y)=frac{y^2-4y+2x}{2y-4}qquad yneq 2.$$
This is the solution of the PDE which satisfies the boundary condition.
One can check that this solution is valid in putting it into the PDE.
answered Dec 8 '18 at 8:11
JJacquelinJJacquelin
43.3k21853
43.3k21853
add a comment |
add a comment |
Thanks for contributing an answer to Mathematics Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fmath.stackexchange.com%2fquestions%2f3026922%2fmethod-of-characteristics-for-f-f-x-f-y-1-where-is-the-solution-valid%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown