Crop image to path created in TikZ?
Is it possible to use a curved path created in TikZ within a LaTeX document to crop an image to fit it, or should I do this in (eg) GIMP outside the document and just insert the image?
I have the (very lo-res) template below which I need to populate with a fragment of a large hi-res image for a poster, and have a better smooth curved edge than the one which would result from just re-using the template in GIMP.
I know the locations of the points of inflection in terms of percent of image width and height, but I lack the syntax and vocabulary to express this in TikZ and then place the includeimage{} so that only the portion bounded by the template is visible.
graphics paths crop curved
add a comment |
Is it possible to use a curved path created in TikZ within a LaTeX document to crop an image to fit it, or should I do this in (eg) GIMP outside the document and just insert the image?
I have the (very lo-res) template below which I need to populate with a fragment of a large hi-res image for a poster, and have a better smooth curved edge than the one which would result from just re-using the template in GIMP.
I know the locations of the points of inflection in terms of percent of image width and height, but I lack the syntax and vocabulary to express this in TikZ and then place the includeimage{} so that only the portion bounded by the template is visible.
graphics paths crop curved
add a comment |
Is it possible to use a curved path created in TikZ within a LaTeX document to crop an image to fit it, or should I do this in (eg) GIMP outside the document and just insert the image?
I have the (very lo-res) template below which I need to populate with a fragment of a large hi-res image for a poster, and have a better smooth curved edge than the one which would result from just re-using the template in GIMP.
I know the locations of the points of inflection in terms of percent of image width and height, but I lack the syntax and vocabulary to express this in TikZ and then place the includeimage{} so that only the portion bounded by the template is visible.
graphics paths crop curved
Is it possible to use a curved path created in TikZ within a LaTeX document to crop an image to fit it, or should I do this in (eg) GIMP outside the document and just insert the image?
I have the (very lo-res) template below which I need to populate with a fragment of a large hi-res image for a poster, and have a better smooth curved edge than the one which would result from just re-using the template in GIMP.
I know the locations of the points of inflection in terms of percent of image width and height, but I lack the syntax and vocabulary to express this in TikZ and then place the includeimage{} so that only the portion bounded by the template is visible.
graphics paths crop curved
graphics paths crop curved
asked 10 hours ago
Peter FlynnPeter Flynn
1,60321421
1,60321421
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Yes, it is.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
clip (0,0) to[out=0,in=180] ++ (6,1) -- ++ (0,1)
to[out=180,in=0] ++ (-6,-1) -- cycle;
node at (3,1) {includegraphics{example-image-duck}};
end{tikzpicture}
end{document}
In terms of disk space, it is not clear whether the invisible portion of the cropped image is still embedded in the final file, .pdf probably. That would be nice to get rid of it in some way.
– pluton
8 hours ago
@pluton I cannot answer your question and even do not know if that is a real LaTeX question. I believe that there are tools out there that do what you are suggesting, but I never worked with them, let alone tried to involve them in the LaTeX workflow.
– marmot
8 hours ago
That is outstanding, thank you so much. I have learned a lot from that.
– Peter Flynn
8 hours ago
1
And @pluton alas yes, the whole rectangle of the original image is still stored in the PDF document. You could save a little space by editing it to blank out the invisible portion (plus a margin) by setting it to a plain colour or to transparent, I guess.
– Peter Flynn
8 hours ago
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "85"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f483816%2fcrop-image-to-path-created-in-tikz%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Yes, it is.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
clip (0,0) to[out=0,in=180] ++ (6,1) -- ++ (0,1)
to[out=180,in=0] ++ (-6,-1) -- cycle;
node at (3,1) {includegraphics{example-image-duck}};
end{tikzpicture}
end{document}
In terms of disk space, it is not clear whether the invisible portion of the cropped image is still embedded in the final file, .pdf probably. That would be nice to get rid of it in some way.
– pluton
8 hours ago
@pluton I cannot answer your question and even do not know if that is a real LaTeX question. I believe that there are tools out there that do what you are suggesting, but I never worked with them, let alone tried to involve them in the LaTeX workflow.
– marmot
8 hours ago
That is outstanding, thank you so much. I have learned a lot from that.
– Peter Flynn
8 hours ago
1
And @pluton alas yes, the whole rectangle of the original image is still stored in the PDF document. You could save a little space by editing it to blank out the invisible portion (plus a margin) by setting it to a plain colour or to transparent, I guess.
– Peter Flynn
8 hours ago
add a comment |
Yes, it is.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
clip (0,0) to[out=0,in=180] ++ (6,1) -- ++ (0,1)
to[out=180,in=0] ++ (-6,-1) -- cycle;
node at (3,1) {includegraphics{example-image-duck}};
end{tikzpicture}
end{document}
In terms of disk space, it is not clear whether the invisible portion of the cropped image is still embedded in the final file, .pdf probably. That would be nice to get rid of it in some way.
– pluton
8 hours ago
@pluton I cannot answer your question and even do not know if that is a real LaTeX question. I believe that there are tools out there that do what you are suggesting, but I never worked with them, let alone tried to involve them in the LaTeX workflow.
– marmot
8 hours ago
That is outstanding, thank you so much. I have learned a lot from that.
– Peter Flynn
8 hours ago
1
And @pluton alas yes, the whole rectangle of the original image is still stored in the PDF document. You could save a little space by editing it to blank out the invisible portion (plus a margin) by setting it to a plain colour or to transparent, I guess.
– Peter Flynn
8 hours ago
add a comment |
Yes, it is.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
clip (0,0) to[out=0,in=180] ++ (6,1) -- ++ (0,1)
to[out=180,in=0] ++ (-6,-1) -- cycle;
node at (3,1) {includegraphics{example-image-duck}};
end{tikzpicture}
end{document}
Yes, it is.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}
clip (0,0) to[out=0,in=180] ++ (6,1) -- ++ (0,1)
to[out=180,in=0] ++ (-6,-1) -- cycle;
node at (3,1) {includegraphics{example-image-duck}};
end{tikzpicture}
end{document}
answered 10 hours ago
marmotmarmot
116k5147277
116k5147277
In terms of disk space, it is not clear whether the invisible portion of the cropped image is still embedded in the final file, .pdf probably. That would be nice to get rid of it in some way.
– pluton
8 hours ago
@pluton I cannot answer your question and even do not know if that is a real LaTeX question. I believe that there are tools out there that do what you are suggesting, but I never worked with them, let alone tried to involve them in the LaTeX workflow.
– marmot
8 hours ago
That is outstanding, thank you so much. I have learned a lot from that.
– Peter Flynn
8 hours ago
1
And @pluton alas yes, the whole rectangle of the original image is still stored in the PDF document. You could save a little space by editing it to blank out the invisible portion (plus a margin) by setting it to a plain colour or to transparent, I guess.
– Peter Flynn
8 hours ago
add a comment |
In terms of disk space, it is not clear whether the invisible portion of the cropped image is still embedded in the final file, .pdf probably. That would be nice to get rid of it in some way.
– pluton
8 hours ago
@pluton I cannot answer your question and even do not know if that is a real LaTeX question. I believe that there are tools out there that do what you are suggesting, but I never worked with them, let alone tried to involve them in the LaTeX workflow.
– marmot
8 hours ago
That is outstanding, thank you so much. I have learned a lot from that.
– Peter Flynn
8 hours ago
1
And @pluton alas yes, the whole rectangle of the original image is still stored in the PDF document. You could save a little space by editing it to blank out the invisible portion (plus a margin) by setting it to a plain colour or to transparent, I guess.
– Peter Flynn
8 hours ago
In terms of disk space, it is not clear whether the invisible portion of the cropped image is still embedded in the final file, .pdf probably. That would be nice to get rid of it in some way.
– pluton
8 hours ago
In terms of disk space, it is not clear whether the invisible portion of the cropped image is still embedded in the final file, .pdf probably. That would be nice to get rid of it in some way.
– pluton
8 hours ago
@pluton I cannot answer your question and even do not know if that is a real LaTeX question. I believe that there are tools out there that do what you are suggesting, but I never worked with them, let alone tried to involve them in the LaTeX workflow.
– marmot
8 hours ago
@pluton I cannot answer your question and even do not know if that is a real LaTeX question. I believe that there are tools out there that do what you are suggesting, but I never worked with them, let alone tried to involve them in the LaTeX workflow.
– marmot
8 hours ago
That is outstanding, thank you so much. I have learned a lot from that.
– Peter Flynn
8 hours ago
That is outstanding, thank you so much. I have learned a lot from that.
– Peter Flynn
8 hours ago
1
1
And @pluton alas yes, the whole rectangle of the original image is still stored in the PDF document. You could save a little space by editing it to blank out the invisible portion (plus a margin) by setting it to a plain colour or to transparent, I guess.
– Peter Flynn
8 hours ago
And @pluton alas yes, the whole rectangle of the original image is still stored in the PDF document. You could save a little space by editing it to blank out the invisible portion (plus a margin) by setting it to a plain colour or to transparent, I guess.
– Peter Flynn
8 hours ago
add a comment |
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f483816%2fcrop-image-to-path-created-in-tikz%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown