What is the white spray-pattern residue inside these Falcon Heavy nozzles?
$begingroup$
What is the white residue in a spray pattern seen on the inside of each nozzle of each side core of this Falcon Heavy image from the Teslarati article SpaceX reveals Falcon Heavy Block 5 in first official photo, timelapse. See also SpaceX tweet.
I'm thinking it could be related to engine shut-down, but it looks like they are assembling a Falcon Heavy for launch, so wouldn't the nozzles have at least been cleaned after the previous launch?
spacex falcon-heavy identify-this-object nozzle merlin-1d
asked 3 hours ago
uhohuhoh
40.4k18149510
$endgroup$
add a comment |
$begingroup$
What is the white residue in a spray pattern seen on the inside of each nozzle of each side core of this Falcon Heavy image from the Teslarati article SpaceX reveals Falcon Heavy Block 5 in first official photo, timelapse. See also SpaceX tweet.
I'm thinking it could be related to engine shut-down, but it looks like they are assembling a Falcon Heavy for launch, so wouldn't the nozzles have at least been cleaned after the previous launch?
spacex falcon-heavy identify-this-object nozzle merlin-1d
asked 3 hours ago
uhohuhoh
40.4k18149510
$endgroup$
add a comment |
$begingroup$
What is the white residue in a spray pattern seen on the inside of each nozzle of each side core of this Falcon Heavy image from the Teslarati article SpaceX reveals Falcon Heavy Block 5 in first official photo, timelapse. See also SpaceX tweet.
I'm thinking it could be related to engine shut-down, but it looks like they are assembling a Falcon Heavy for launch, so wouldn't the nozzles have at least been cleaned after the previous launch?
spacex falcon-heavy identify-this-object nozzle merlin-1d
asked 3 hours ago
uhohuhoh
40.4k18149510
$endgroup$
What is the white residue in a spray pattern seen on the inside of each nozzle of each side core of this Falcon Heavy image from the Teslarati article SpaceX reveals Falcon Heavy Block 5 in first official photo, timelapse. See also SpaceX tweet.
I'm thinking it could be related to engine shut-down, but it looks like they are assembling a Falcon Heavy for launch, so wouldn't the nozzles have at least been cleaned after the previous launch?
spacex falcon-heavy identify-this-object nozzle merlin-1d
spacex falcon-heavy identify-this-object nozzle merlin-1d
asked 3 hours ago
uhohuhoh
40.4k18149510
asked 3 hours ago
uhohuhoh
40.4k18149510
edited 3 hours ago
uhoh
asked 3 hours ago
uhohuhoh
40.4k18149510
asked 3 hours ago
uhohuhoh
40.4k18149510
asked 3 hours ago
uhohuhoh
40.4k18149510
40.4k18149510
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
$begingroup$
I believe it is residue from the TEA-TEB starting fluid.
Triethylaluminum combustion produces aluminum oxides, Triethylborane produces boron oxides. Both are shades of white and grey, matching the streaks. Each engine is tested on the stand at McGregor before installation in a booster, and again in the full booster checkout, so there are several opportunities to deposit the waste, even on a new booster.
They have expressed a goal of zero refurbishment before a typical reflight, which seems to include unnecessary cleaning. They likely have enough data on engine reuse to understand the rate it builds up at, and when it may become a problem.
answered 1 hour ago
SaibooguSaiboogu
4,1362129
$endgroup$
1
$begingroup$
This makes sense (towards zero refurbishment); and the oxides may be quite refractory. I'd wonder if the local change in emissivity could cause temperature gradients and therefore extra stress, but I assume that's been considered.
$endgroup$
– uhoh
1 hour ago
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "508"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f35355%2fwhat-is-the-white-spray-pattern-residue-inside-these-falcon-heavy-nozzles%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
I believe it is residue from the TEA-TEB starting fluid.
Triethylaluminum combustion produces aluminum oxides, Triethylborane produces boron oxides. Both are shades of white and grey, matching the streaks. Each engine is tested on the stand at McGregor before installation in a booster, and again in the full booster checkout, so there are several opportunities to deposit the waste, even on a new booster.
They have expressed a goal of zero refurbishment before a typical reflight, which seems to include unnecessary cleaning. They likely have enough data on engine reuse to understand the rate it builds up at, and when it may become a problem.
answered 1 hour ago
SaibooguSaiboogu
4,1362129
$endgroup$
1
$begingroup$
This makes sense (towards zero refurbishment); and the oxides may be quite refractory. I'd wonder if the local change in emissivity could cause temperature gradients and therefore extra stress, but I assume that's been considered.
$endgroup$
– uhoh
1 hour ago
add a comment |
$begingroup$
I believe it is residue from the TEA-TEB starting fluid.
Triethylaluminum combustion produces aluminum oxides, Triethylborane produces boron oxides. Both are shades of white and grey, matching the streaks. Each engine is tested on the stand at McGregor before installation in a booster, and again in the full booster checkout, so there are several opportunities to deposit the waste, even on a new booster.
They have expressed a goal of zero refurbishment before a typical reflight, which seems to include unnecessary cleaning. They likely have enough data on engine reuse to understand the rate it builds up at, and when it may become a problem.
answered 1 hour ago
SaibooguSaiboogu
4,1362129
$endgroup$
1
$begingroup$
This makes sense (towards zero refurbishment); and the oxides may be quite refractory. I'd wonder if the local change in emissivity could cause temperature gradients and therefore extra stress, but I assume that's been considered.
$endgroup$
– uhoh
1 hour ago
add a comment |
$begingroup$
I believe it is residue from the TEA-TEB starting fluid.
Triethylaluminum combustion produces aluminum oxides, Triethylborane produces boron oxides. Both are shades of white and grey, matching the streaks. Each engine is tested on the stand at McGregor before installation in a booster, and again in the full booster checkout, so there are several opportunities to deposit the waste, even on a new booster.
They have expressed a goal of zero refurbishment before a typical reflight, which seems to include unnecessary cleaning. They likely have enough data on engine reuse to understand the rate it builds up at, and when it may become a problem.
answered 1 hour ago
SaibooguSaiboogu
4,1362129
$endgroup$
I believe it is residue from the TEA-TEB starting fluid.
Triethylaluminum combustion produces aluminum oxides, Triethylborane produces boron oxides. Both are shades of white and grey, matching the streaks. Each engine is tested on the stand at McGregor before installation in a booster, and again in the full booster checkout, so there are several opportunities to deposit the waste, even on a new booster.
They have expressed a goal of zero refurbishment before a typical reflight, which seems to include unnecessary cleaning. They likely have enough data on engine reuse to understand the rate it builds up at, and when it may become a problem.
answered 1 hour ago
SaibooguSaiboogu
4,1362129
answered 1 hour ago
SaibooguSaiboogu
4,1362129
answered 1 hour ago
SaibooguSaiboogu
4,1362129
answered 1 hour ago
SaibooguSaiboogu
4,1362129
4,1362129
1
$begingroup$
This makes sense (towards zero refurbishment); and the oxides may be quite refractory. I'd wonder if the local change in emissivity could cause temperature gradients and therefore extra stress, but I assume that's been considered.
$endgroup$
– uhoh
1 hour ago
add a comment |
1
$begingroup$
This makes sense (towards zero refurbishment); and the oxides may be quite refractory. I'd wonder if the local change in emissivity could cause temperature gradients and therefore extra stress, but I assume that's been considered.
$endgroup$
– uhoh
1 hour ago
1
1
$begingroup$
This makes sense (towards zero refurbishment); and the oxides may be quite refractory. I'd wonder if the local change in emissivity could cause temperature gradients and therefore extra stress, but I assume that's been considered.
$endgroup$
– uhoh
1 hour ago
$begingroup$
This makes sense (towards zero refurbishment); and the oxides may be quite refractory. I'd wonder if the local change in emissivity could cause temperature gradients and therefore extra stress, but I assume that's been considered.
$endgroup$
– uhoh
1 hour ago
add a comment |
Thanks for contributing an answer to Space Exploration Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f35355%2fwhat-is-the-white-spray-pattern-residue-inside-these-falcon-heavy-nozzles%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
