Leveling the sagging side of the home
I am buying a home and one part of the home is actually visibly sagging.
While looking at the crawlspace, I've noticed that some work was done to support the home.
It seems like there is no new settling cracks and it looks like the home has settled, but I want to fix it permanently and level-up the sag.
After looking at the foundation wall, it seems to be in perfect shape and the sag was cased by the woodwork.
Yes, I can improve upon what was done before and add proper footing/ support beam/jacks.
But I am wondering if there is a way for me to attach some sort of a "shelf" directly to the foundation wall, and put jacks on that "shelf".
floor structural crawlspace support
asked 3 hours ago
AndrewAndrew
12314
add a comment |
I am buying a home and one part of the home is actually visibly sagging.
While looking at the crawlspace, I've noticed that some work was done to support the home.
It seems like there is no new settling cracks and it looks like the home has settled, but I want to fix it permanently and level-up the sag.
After looking at the foundation wall, it seems to be in perfect shape and the sag was cased by the woodwork.
Yes, I can improve upon what was done before and add proper footing/ support beam/jacks.
But I am wondering if there is a way for me to attach some sort of a "shelf" directly to the foundation wall, and put jacks on that "shelf".
floor structural crawlspace support
asked 3 hours ago
AndrewAndrew
12314
I hope those blocks standing on end are not supporting any significant weight ...
– brhans
3 hours ago
Oh dear, I don't think there is an approved sort of method to fix this short of tearing down the house. I'm can get pretty cowboy at times but I wouldn't attempt it without having a serious look at it.
– Joe Fala
2 hours ago
add a comment |
I am buying a home and one part of the home is actually visibly sagging.
While looking at the crawlspace, I've noticed that some work was done to support the home.
It seems like there is no new settling cracks and it looks like the home has settled, but I want to fix it permanently and level-up the sag.
After looking at the foundation wall, it seems to be in perfect shape and the sag was cased by the woodwork.
Yes, I can improve upon what was done before and add proper footing/ support beam/jacks.
But I am wondering if there is a way for me to attach some sort of a "shelf" directly to the foundation wall, and put jacks on that "shelf".
floor structural crawlspace support
asked 3 hours ago
AndrewAndrew
12314
I am buying a home and one part of the home is actually visibly sagging.
While looking at the crawlspace, I've noticed that some work was done to support the home.
It seems like there is no new settling cracks and it looks like the home has settled, but I want to fix it permanently and level-up the sag.
After looking at the foundation wall, it seems to be in perfect shape and the sag was cased by the woodwork.
Yes, I can improve upon what was done before and add proper footing/ support beam/jacks.
But I am wondering if there is a way for me to attach some sort of a "shelf" directly to the foundation wall, and put jacks on that "shelf".
floor structural crawlspace support
floor structural crawlspace support
asked 3 hours ago
AndrewAndrew
12314
asked 3 hours ago
AndrewAndrew
12314
asked 3 hours ago
AndrewAndrew
12314
asked 3 hours ago
AndrewAndrew
12314
asked 3 hours ago
AndrewAndrew
12314
12314
I hope those blocks standing on end are not supporting any significant weight ...
– brhans
3 hours ago
Oh dear, I don't think there is an approved sort of method to fix this short of tearing down the house. I'm can get pretty cowboy at times but I wouldn't attempt it without having a serious look at it.
– Joe Fala
2 hours ago
add a comment |
I hope those blocks standing on end are not supporting any significant weight ...
– brhans
3 hours ago
Oh dear, I don't think there is an approved sort of method to fix this short of tearing down the house. I'm can get pretty cowboy at times but I wouldn't attempt it without having a serious look at it.
– Joe Fala
2 hours ago
I hope those blocks standing on end are not supporting any significant weight ...
– brhans
3 hours ago
I hope those blocks standing on end are not supporting any significant weight ...
– brhans
3 hours ago
Oh dear, I don't think there is an approved sort of method to fix this short of tearing down the house. I'm can get pretty cowboy at times but I wouldn't attempt it without having a serious look at it.
– Joe Fala
2 hours ago
Oh dear, I don't think there is an approved sort of method to fix this short of tearing down the house. I'm can get pretty cowboy at times but I wouldn't attempt it without having a serious look at it.
– Joe Fala
2 hours ago
add a comment |
1 Answer
1
active
oldest
votes
Sure you can fix this, but I wouldn’t opt for the “shelf” idea.
Typically, in a post and beam foundation, all loads are transferred directly to the soil. Installing a “shelf” will put thrust on the foundation wall. Obviously the foundation is marginal and I doubt the wall is designed for any horizontal thrust.
You’ll be pouring several “pad” footings, so why not pour one near the foundation wall and eliminate the “shelf”?
Btw, Is the roof really sagging, or is that gutter installed in such a manner that it appears to be sagging. If you look close, you’ll see there’s about 1 1/2” of fascia board exposed under the gutter on the left side of the house, but about 3” exposed on the right side. (Although, that roof section on the far right looks like its sagging.)
Also, if we’re sagging very much where you have the arrow pointed, that window would be cracked/broken.
You’re lucky that it’s a one story house. The loads are easy to follow from roof, to walls, to floor, to footing.
If you’re located in a high seismic zone or high wind area, you’ll need extra holddowns so I’d contact a structural engineer or architect for help. Good luck.
answered 58 mins ago
Lee SamLee Sam
10.6k3718
Yes, roof is sagging - if you look at the siding, you will notice. The sag is visible when I look from the top long the roof. So, unfortunately, it's not simple as visual illusion created by the gutter. Your comment makes sense - I will pour new footings and will put the beam supported by jacks. It should do the job.
– Andrew
51 mins ago
1
And I see they left you a screw jack so you can get started.
– Lee Sam
45 mins ago
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "73"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f159478%2fleveling-the-sagging-side-of-the-home%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Sure you can fix this, but I wouldn’t opt for the “shelf” idea.
Typically, in a post and beam foundation, all loads are transferred directly to the soil. Installing a “shelf” will put thrust on the foundation wall. Obviously the foundation is marginal and I doubt the wall is designed for any horizontal thrust.
You’ll be pouring several “pad” footings, so why not pour one near the foundation wall and eliminate the “shelf”?
Btw, Is the roof really sagging, or is that gutter installed in such a manner that it appears to be sagging. If you look close, you’ll see there’s about 1 1/2” of fascia board exposed under the gutter on the left side of the house, but about 3” exposed on the right side. (Although, that roof section on the far right looks like its sagging.)
Also, if we’re sagging very much where you have the arrow pointed, that window would be cracked/broken.
You’re lucky that it’s a one story house. The loads are easy to follow from roof, to walls, to floor, to footing.
If you’re located in a high seismic zone or high wind area, you’ll need extra holddowns so I’d contact a structural engineer or architect for help. Good luck.
answered 58 mins ago
Lee SamLee Sam
10.6k3718
Yes, roof is sagging - if you look at the siding, you will notice. The sag is visible when I look from the top long the roof. So, unfortunately, it's not simple as visual illusion created by the gutter. Your comment makes sense - I will pour new footings and will put the beam supported by jacks. It should do the job.
– Andrew
51 mins ago
1
And I see they left you a screw jack so you can get started.
– Lee Sam
45 mins ago
add a comment |
Sure you can fix this, but I wouldn’t opt for the “shelf” idea.
Typically, in a post and beam foundation, all loads are transferred directly to the soil. Installing a “shelf” will put thrust on the foundation wall. Obviously the foundation is marginal and I doubt the wall is designed for any horizontal thrust.
You’ll be pouring several “pad” footings, so why not pour one near the foundation wall and eliminate the “shelf”?
Btw, Is the roof really sagging, or is that gutter installed in such a manner that it appears to be sagging. If you look close, you’ll see there’s about 1 1/2” of fascia board exposed under the gutter on the left side of the house, but about 3” exposed on the right side. (Although, that roof section on the far right looks like its sagging.)
Also, if we’re sagging very much where you have the arrow pointed, that window would be cracked/broken.
You’re lucky that it’s a one story house. The loads are easy to follow from roof, to walls, to floor, to footing.
If you’re located in a high seismic zone or high wind area, you’ll need extra holddowns so I’d contact a structural engineer or architect for help. Good luck.
answered 58 mins ago
Lee SamLee Sam
10.6k3718
Yes, roof is sagging - if you look at the siding, you will notice. The sag is visible when I look from the top long the roof. So, unfortunately, it's not simple as visual illusion created by the gutter. Your comment makes sense - I will pour new footings and will put the beam supported by jacks. It should do the job.
– Andrew
51 mins ago
1
And I see they left you a screw jack so you can get started.
– Lee Sam
45 mins ago
add a comment |
Sure you can fix this, but I wouldn’t opt for the “shelf” idea.
Typically, in a post and beam foundation, all loads are transferred directly to the soil. Installing a “shelf” will put thrust on the foundation wall. Obviously the foundation is marginal and I doubt the wall is designed for any horizontal thrust.
You’ll be pouring several “pad” footings, so why not pour one near the foundation wall and eliminate the “shelf”?
Btw, Is the roof really sagging, or is that gutter installed in such a manner that it appears to be sagging. If you look close, you’ll see there’s about 1 1/2” of fascia board exposed under the gutter on the left side of the house, but about 3” exposed on the right side. (Although, that roof section on the far right looks like its sagging.)
Also, if we’re sagging very much where you have the arrow pointed, that window would be cracked/broken.
You’re lucky that it’s a one story house. The loads are easy to follow from roof, to walls, to floor, to footing.
If you’re located in a high seismic zone or high wind area, you’ll need extra holddowns so I’d contact a structural engineer or architect for help. Good luck.
answered 58 mins ago
Lee SamLee Sam
10.6k3718
Sure you can fix this, but I wouldn’t opt for the “shelf” idea.
Typically, in a post and beam foundation, all loads are transferred directly to the soil. Installing a “shelf” will put thrust on the foundation wall. Obviously the foundation is marginal and I doubt the wall is designed for any horizontal thrust.
You’ll be pouring several “pad” footings, so why not pour one near the foundation wall and eliminate the “shelf”?
Btw, Is the roof really sagging, or is that gutter installed in such a manner that it appears to be sagging. If you look close, you’ll see there’s about 1 1/2” of fascia board exposed under the gutter on the left side of the house, but about 3” exposed on the right side. (Although, that roof section on the far right looks like its sagging.)
Also, if we’re sagging very much where you have the arrow pointed, that window would be cracked/broken.
You’re lucky that it’s a one story house. The loads are easy to follow from roof, to walls, to floor, to footing.
If you’re located in a high seismic zone or high wind area, you’ll need extra holddowns so I’d contact a structural engineer or architect for help. Good luck.
answered 58 mins ago
Lee SamLee Sam
10.6k3718
answered 58 mins ago
Lee SamLee Sam
10.6k3718
answered 58 mins ago
Lee SamLee Sam
10.6k3718
answered 58 mins ago
Lee SamLee Sam
10.6k3718
10.6k3718
Yes, roof is sagging - if you look at the siding, you will notice. The sag is visible when I look from the top long the roof. So, unfortunately, it's not simple as visual illusion created by the gutter. Your comment makes sense - I will pour new footings and will put the beam supported by jacks. It should do the job.
– Andrew
51 mins ago
1
And I see they left you a screw jack so you can get started.
– Lee Sam
45 mins ago
add a comment |
Yes, roof is sagging - if you look at the siding, you will notice. The sag is visible when I look from the top long the roof. So, unfortunately, it's not simple as visual illusion created by the gutter. Your comment makes sense - I will pour new footings and will put the beam supported by jacks. It should do the job.
– Andrew
51 mins ago
1
And I see they left you a screw jack so you can get started.
– Lee Sam
45 mins ago
Yes, roof is sagging - if you look at the siding, you will notice. The sag is visible when I look from the top long the roof. So, unfortunately, it's not simple as visual illusion created by the gutter. Your comment makes sense - I will pour new footings and will put the beam supported by jacks. It should do the job.
– Andrew
51 mins ago
Yes, roof is sagging - if you look at the siding, you will notice. The sag is visible when I look from the top long the roof. So, unfortunately, it's not simple as visual illusion created by the gutter. Your comment makes sense - I will pour new footings and will put the beam supported by jacks. It should do the job.
– Andrew
51 mins ago
1
1
And I see they left you a screw jack so you can get started.
– Lee Sam
45 mins ago
And I see they left you a screw jack so you can get started.
– Lee Sam
45 mins ago
add a comment |
Thanks for contributing an answer to Home Improvement Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fdiy.stackexchange.com%2fquestions%2f159478%2fleveling-the-sagging-side-of-the-home%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I hope those blocks standing on end are not supporting any significant weight ...
– brhans
3 hours ago
Oh dear, I don't think there is an approved sort of method to fix this short of tearing down the house. I'm can get pretty cowboy at times but I wouldn't attempt it without having a serious look at it.
– Joe Fala
2 hours ago